Modern temperature chamber for battery tester
JUMO application example
NOTES + KNOWLEDGE
The control equipment JUMO was deployed in climate chambers developed by Van den Berg Klimaattechniek.Mission
The demand for battery testing is constantly growing within the industry. Additional test channels are needed. Therefore, the EnergyVille battery testing laboratory has recently been successfully expanded with a modern battery tester from the manufacturer PEC. In addition to the tester, a climate chamber from Van den Berg Klimaattechniek with extended temperature control from JUMO was installed. The tester in EnergyVille is the second tester from the manufacturer PEC. This is a 16-channel battery tester, ideal for testing and evaluating batteries for electric vehicles (xEV) and industrial battery modules (up to 150 volts). Until now, testing has been limited to only 80 volts. Nowadays, higher voltage is required as more cells are placed together in one module. As a result, fewer modules may be sufficient for the same amount of energy.
Solution
Batteries are sensitive to temperature changes.
The size of the compartment must correspond to the batteries in a passenger car (2 m long, 1 m wide and 20 cm high). Therefore, EnergyVille looked for a specialized supplier of climate chambers. The tender was reached by Van den Berg Klimattechnik in Reeuwijk. They were able to make the compartments in the climate chamber to the required dimensions. Testing is required when a product equipped with a battery enters production. This is due to the influence of ambient temperature. Batteries are sensitive to temperature changes. Aging at high temperatures becomes much faster, this process begins at 40 °C. Cold temperatures also affect battery performance.
For a custom built climate control cabinet, EnergyVille was looking for an advanced control system that went beyond traditional temperature controllers. They came to JUMO for this request. Together with Van den Bergh Klimattechnik, the engineering team JUMO implemented a customer-centric configuration. An automation system JUMO was used for this purpose. The system JUMO mTRON T provides the implementation of the desired control of the climate chamber and is equipped with CODESYS PLC and web visualization.
Project results
Cooperation with Van den Berg Klimaattechniek and JUMO Meet- en Regeltechniek B.V. has resulted in a good complement to advanced performance and life testing equipment. The battery tester is designed for laboratory and production scale and is available 24/7 from the EnergyVille laboratory.
Do you have a similar task?
Manufacturer JUMO expertise
We have measurement and control technology solutions that are used in a variety of machines and factories.
All applications