Logo JUMO
Clean solution

Vacuum distillation plants protect the environment

JUMO application example

Success story: industrial water treatment

In many processes, water is used as an auxiliary - whether as ultrapure water in rinsing and cleaning plants, cooling water or as a solution for treating chemicals in plating or acid baths. Contaminated wastewater from manufacturing is usually collected in tanks where it is disinfected, filtered and any chemicals neutralized in an often labor-intensive and expensive manner. More and more industries are now focusing on the inevitable creation of this wastewater. JUMO also faced the challenge of completely modernizing its own outdated, traditional wastewater system.

Quest

The system consisted of a collection tank and a batch treatment unit in which the pH was raised using lime milk and chromate disinfection was carried out using sodium dithionite. Solids were separated using a chamber filter press. Disadvantages of this solution included high labor costs and large amounts of hazardous waste in the form of unusable sludge.

Part of wastewater treatment plant JUMO

Solution Approach

That's why JUMO decided to purchase a vacuum distillation unit for the general sanitation of this area. In this case, the wastewater first evaporates under negative pressure of approximately 85 degrees Celsius. The steam compressor then compresses the water vapor to normal pressure (approximately 120 degrees Celsius). The water vapor can then again provide excess energy to evaporate the wastewater. The distillate is returned to the production areas as industrial water of pure water quality.

The new solution also uses JUMO measurement technology. An important key parameter is the pH value. Cycling temperature and pressure vary, and the operating temperature of 95 degrees Celsius at the pH measuring point of the installation places particularly high demands on the pH electrode. This is why high quality JUMO tecLine HY with zirconia diaphragm is used. The specific design inside, as well as the special high temperature and high pressure gel electrolyte, ensure reliable measurements.

The electrode JUMO tecLine pH is controlled by the new digital transmitter JUMO digiLine. It is screwed directly onto the electrode head to digitize measured values close to the measuring point itself. The sensor and measuring head form a unit as long as the part bearing the pH electrode is in working condition. If it reaches the end of its natural life, the electronic head can continue to be used with a new electrode. Other meters in this type of installation include pressure and temperature. This is where the Rugged Pressure Transmitter JUMO dTRANS p30 and Temperature Sensor JUMO Pt100 RTD. come into play

External view of the vacuum distillation unit in JUMO
The vacuum distillation unit is equipped with JUMO technology
Interior view of vacuum distillation plant in JUMO
A look inside the vacuum distillation unit in JUMO

Project result

The choice of a vacuum distillation unit paid off for the JUMO. It saves about 95 percent energy compared to atmospheric distillation. Since JUMO generates excess energy from solar energy and its own cogeneration units, the implemented process of using water energy also makes sense from an energy point of view. We managed to build the new plant in such a way that it was much more compact. There are virtually no pollutants and only one IBC container is included to collect condensate. Since the distillate is returned to production areas as industrial water
Clean water quality, valuable resources are conserved and the environment is protected.

Reduce waste
95Energy Saving%no
The distillate is used as process water.

Do you have a similar task?

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.