Systematic exhaust air cleaning
JUMO application example
Success story: exhaust gas purification
Exhaust air scrubbing processes have been successfully used in many industries. These processes can be used to treat single-component and multi-component exhaust air compositions, as well as exhaust air streams that are both environmentally harmful and odorous. terra-care Umwelttechnik GmbH in Recklinghausen, Germany, not only uses components from JUMO in the field of measurement and control technology, but also relies on the engineering services JUMO.Quest
terra-care Umwelttechnik GmbH prefers to use multi-stage systems with absorption agents and biological treatment stages to reliably and effectively comply with legal pollutant limits. The process relies on the mass transfer of soluble components of raw gas and sorbent on the one hand, and the biodegradability of many components of the exhaust air on the other. The high settling rates of washing systems mean that the emission limit values stipulated in the "TA Luft" (Technical Instruction for Air Quality Control) of the German Federal Ministry for the Protection of the Environment, Nature and Reactor Safety or BImSchV (German Federal Emission Protection Act) can be reliably achieved and guaranteed. The safe functionality of the installation largely depends on the controlled operating parameters of the installation parts and the quality of the water. For this reason, the entire system is exclusively monitored and controlled using measuring and control technology components.
Solution Approach
Raw gas is supplied to the washing system and directed through the column. Airborne solvents that are carried along are removed from the treated exhaust air stream by a demister before being sent to the next cleaning stage. To minimize operating material costs, the solvent is recycled, continuously checked using measurement technology and, if necessary, chemically balanced. Process engineering at the biological treatment stage can be considered equivalent. However, here the biodegradable materials are reduced by microbacterial mechanisms. The safe functionality of the installation largely depends on the controlled operating parameters of the installation parts and the quality of the water. For this reason, the entire system is exclusively monitored and controlled using JUMO measurement and control technology components. In the factories of Umwelttechnik GmbH, conductivity, water temperature, oxygen content, pH value, filling level, differential pressure and supply air temperature are measured in individual cleaning steps and evaluated by touch JUMO AQUIS.
The process diagram and tabular list of all measurement parameters support the operator in the form of a diagram on the touch screen JUMO AQUIS. Water quality is guaranteed depending on the measured values. Likewise, the circulation pump and fan outputs are controlled so that the entire system operates independently and without any operational effort.
Project results
In this process, the JUMO Engineering team collaborated with the customer to develop product requirements specifications and a specification sheet based on a feasibility analysis. This resulted in a customized system solution that made it possible to utilize the extensive product portfolio JUMO in measurement and control technology.
Do you have a similar task?
Manufacturer JUMO expertise
Manufacturer JUMO expertise
We have measurement and control technology solutions that are used in a variety of machines and factories.
All applications