JUMO application example
HYDROGEN SUCCESS STORY
Green hydrogen is increasingly important in tackling climate change and phasing out fossil fuels, and is regarded as a key factor in decarbonising industry, heavy transport and energy supply. FEST PEM electrolysers play a crucial role in its production by using electric current to split water into hydrogen and oxygen. They are used in an innovative project near the JUMO headquarters in Germany. The project includes an electrolyser, a hydrogen filling station and a trailer filling station.
Problem
To ensure a safe, efficient and sustainable electrolysis process, all relevant process variables must be accurately controlled. The most important of these are temperature and conductivity to prevent overheating, loss of performance, deposits or malfunctions. Since even the smallest deviations can degrade process efficiency and electrolyte quality, the plant must be equipped with a high-precision measurement system that provides stable and error-free values and allows continuous monitoring.
Solution Approach
The required measuring system is implemented using the innovative IO-Link sensors from JUMO. Not only do they provide accurate, real-time temperature and conductivity measurements, but they also offer a digital interface for simplified planning and startup. Instead of complex wiring with separate lines for energy and sensor data, a standardized cable with M12 connectors is sufficient because it carries both current and digital measured values. As a result, wiring requirements are reduced to 50 %, depending on the size of the installation.
Sensors can be centrally configured and configurations can be saved and quickly transferred to other devices as needed. This saves time, facilitates integration into the management environment, and increases flexibility for customizations or enhancements. Extensive real-time diagnostic data allows deviations or wear to be detected early and effectively corrected. Additionally, IO-Link technology allows for remote diagnostics and remote maintenance, so operators and service technicians have access to all the sensor information they need at any time without being on site.
Project results
The project impressively demonstrates how IO-Link is sustainably transforming industrial automation, particularly hydrogen production, opening up new opportunities in process transparency, efficiency and reliability. System complexity is reduced, hardware availability is increased, and competitive advantage is enhanced. Ultimately, the result is a model project that demonstrates how digitalization and sustainability go hand in hand and can help advance the energy transition.
Equipment JUMO
-
JUMO dTRANS T1000Temperature sensor with IO-Link
Type 902915 -
JUMO digiLine CR HT40Head transmitter with conductive two-electrode conductivity sensor type SL
Type 202766
No results were found for the selected parameters.
Do you have a similar task?
Manufacturer JUMO expertise
JUMO offers measuring instruments and automation systems for industrial applications. Contact IMAGO for equipment selection and supply for a project in Kazakhstan.
All applications