Logo JUMO
Correct product in storage tank?

Level control in diesel fuel tanks

JUMO application example

Success story: level measurement

According to the German Federal Statistical Office, the average price of diesel fuel for final consumers increased by more than 18 percent from 2016 to 2019. Therefore, it would be beneficial for service station operators to actively think about fuel storage to improve profitability. A fairly rare, but nevertheless real danger is water entering the vehicle's fuel tank during a completely normal refueling operation. The uniform solution from JUMO solves this problem.

Quest

How can a mixture of water and diesel come out at a gas station? In recent years, water has repeatedly entered and contaminated underground diesel or gasoline tanks, especially during periods of heavy rainfall. Engines are not suitable for this at all. The engine may start briefly because 2 the fluids do not mix and a certain amount of diesel fuel remains in the injection system. But the driver of this vehicle will not go far. What is this is because the water sinks to the bottom of the tank and is therefore first sucked through the pump. This can cause significant damage. The entire fuel system must be cleaned and filters replaced.

To prevent this from happening, the manufacturer of the diesel tank system commissioned JUMO to find a common solution. In a diesel tank, the level must be measured continuously so that refill messages can be sent and the pump can be controlled. At the same time, point level measurement should be used to detect possible water ingress.

JUMO NESOS series with various float switches

Solution Approach

The implemented JUMO solution is based on a combination of products from the JUMO NESOS. range. A float switch and a level transmitter have been integrated into one product, so that installation is only possible through the tank opening. In addition, the product series has the necessary approvals for potentially explosive areas.

Innovative combined solution

The float switch is useful for different densities of water and diesel fuel. It is designed to float on the interface between water and diesel fuel, resulting in an alarm message. The combined sensor JUMO NESOS is designed specifically for use in diesel tanks with a total length of more than 4 meters. Level sensing allows station operators to determine actual diesel fuel levels and average consumption, helping them plan demand proactively and economically.

In addition, level measurement transformers JUMO NESOS provide a virtually continuous standard signal from
4 to 20 mA in the temperature range -52 to +180 °C. The expansion is 5,5 mm. Options with temperature sensors Pt100 or Pt1000 as well as temperature switches, temperature transmitters and displays are available as additional options.

Automation system for plant management

Complete plant control can be realized using the scalable measurement, control and automation system JUMO mTRON T. The modular component concept combines variable I/O modules with powerful control panels. It is just as impressive in the field of measuring value recording as it is for complex control tasks and complex automation solutions. Extremely high-quality universal analog inputs for a wide range of input variables and the proven control algorithm JUMO ensure a high degree of process reliability and the highest possible transparency. A digital input module is used for required online alerts. As a result, the user can receive information via email on his smartphone.

The digital indicator JUMO diraVIEW directly reports faults on the tank. The basic device of this series is already equipped with 1 analog input, 2 binary inputs, 2 relay outputs, 2 logic outputs and a voltage source for two-wire transformers. 3 expansion slots can be equipped with additional inputs and outputs as well as interfaces. Signal texts are particularly easy to spot due to the color change from green to red.

Dzyumo directory of digital indicators
Digital indicators of the JUMO diraVIEW series in different formats
JUMO mTRON T Measurement, control and automation system with HMI
JUMO mTRON T Measurement, control and automation system with HMI for tank monitoring

Project results

Level monitoring was implemented as specified. The combined float switch and level transmitter solution of the JUMO NESOS series provides accurate point and contour level measurement. It signals when it is time to fill and signals if water is about to enter the tank. The online alarm is triggered via the measurement, control and automation system JUMO mTRON T, which also controls the pumps. In addition, color-coded alarm texts are displayed directly on the tank using the digital indicator display JUMO diraVIEW.

Reliable level monitoring
Online alarm
Display with alarm texts in different colors

Do you have a similar task?

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.