Effective preventive measures against power outages
JUMO application example
Energy supply - a success story
Current is the central building block for prosperity, security and well-being. It creates warmth and light, provides communication and mobility. In fact, it is vital in areas where human life depends on a reliable power supply. That's why some industries are taking steps to reduce the risk of outages as much as possible. These include both rotating and static uninterruptible power supply (UPS) systems, which are used to overcome power outages. A well-known supplier of UPS systems is Piller Group GmbH, which has seen a steady increase in demand for more than 7000 installed kinetic energy storage systems and more than 6000 rotating UPS systems.Quest
Piller Group GmbH owns 7 chamber furnaces at the Osterode am Harz site, which had been in use for several years and required modernization. The control housings, along with their contents, had to be replaced and fitted with a new controller that would function as both a program controller and a controller in continuous operation. In addition, the frequency converters and safety temperature limiters needed to be replaced, as well as the control panel located on each oven.
Solution Approach
After a detailed analysis of JUMO Engineering, a customized solution was developed and implemented in close cooperation between the Piller Group, JUMO and MAGG Elektroanlagen (system partner JUMO).
Control and automation of the plant is provided by the powerful JUMO variTRON 500, which is used to make the plant self-sufficient for the 2 furnace system. Thus, a total of 4 systems were implemented. The software JUMO smartWARE Evaluation handles data recording and visualization.
A safety temperature limiter JUMO was also installed for each individual oven to increase the safety of the installation. MAGG Elektroanlagen GmbH was responsible for the schematic design, planning and construction of the new control cabinet. He took care of the installation of the frequency converters, JUMO variTRON 500 with all inputs/outputs and operating panel, as well as the safety technology provided by the safety temperature limiters JUMO. Likewise, MAGG Elektroanlagen was the contact for delivery, installation and station cable.
In this way, any malfunctions that occur can be detected at an early stage so that adequate countermeasures can be taken. These include shutting down parts of the installation or alerting technical personnel.
Project results
JUMO is “more than sensors + automation”. After all, the project implemented a complex solution adapted to the needs of the Piller Group, which included not only hardware, but also software. Thus, the customer receives the most efficient and safe system, which practically works itself through automation and which can be flexibly evaluated from anywhere according to JUMO smartWARE Evaluation.
Do you have a similar task?
Manufacturer JUMO expertise
JUMO offers measuring instruments and automation systems for industrial applications. Contact IMAGO for equipment selection and supply for a project in Kazakhstan.
All applications