Logo JUMO

JUMO application example

Aquaculture success story

Recirculating aquaculture systems (SRA/RAS) are among the promising technologies in fish farming and provide efficient and environmentally friendly cultivation of fish in controlled production conditions. In essence, these are modern water treatment systems, which, thanks to a closed circulation loop, do not depend on external influences. In addition, they require very little space. Another important feature is that only a minimal amount of water needs to be replaced daily, which saves resources.

Problem

In 2018 ANFACO (a Spanish research institute for canning and aquaculture) required a professional system RAS to optimize and expand its services. In addition to continuous monitoring and optimization of temperature, salt and oxygen content, pH value, alkalinity and water chemistry, suspended solids removal and wastewater treatment using a biofilter were also required. The project also included special requirements. Salt had to be added to the water in the individual growing pools to simulate seawater, as the facility is located far from the coast. Process RAS and the aquaculture room had to be on two different floors, and process data had to be accessible at any time from a smartphone or tablet via the JUMO Device App. app. Additionally, text messages were required to alert when deviations from setpoints occurred.

Recirculating aquaculture system in ANFACO

Solution Approach

All requirements were met using an intelligent complete JUMO solution led by JUMO's Spanish subsidiary. The JUMO mTRON T central processing module controls, automates and visualises the RAS system. The JUMO AQUIS touch S multichannel measuring instrument and JUMO CTI-500 monitor water analysis parameters and measure inductive conductivity. A total of 6 measurements are performed simultaneously, some also controlled: 2× pH, 2× inductive conductivity, 1× redox potential and 1× oxygen measurement. Parameters such as water temperature, salinity and other critical values can therefore be set and monitored. Recorded data is transferred to the customer's data centre for analysis and displayed on a screen or tablet in the aquaculture facility. Remote access is available using the JUMO Device App.

Controlling system RAS using JUMO mTRON T
Controlling system RAS using JUMO mTRON T
Control panel JUMO mTRON T
Control panel JUMO mTRON T

Project result

The collaboration between ANFACO, JUMO and technical services has resulted in the creation of an extremely safe and reliable system RAS, providing optimal conditions for growing and maintaining fish. The customer's needs and requirements were fully satisfied with a comprehensive solution, which confirms the possibility of using innovative technologies JUMO in almost all industries and areas.

Transfer of all parameters to the customer’s data center
Additional HMI-display in the aquaculture hall
Remote access via JUMO Device App

Do you have a similar task?

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.