Logo JUMO
High throughput with great reliability

Temperature control in semiconductor manufacturing

JUMO application example

Success story: temperature control

As a corporate spin-off of ASM, the Dutch company Levitech produces machines for the semiconductor industry. To achieve the smaller structures and greater uniformity in semiconductors that the market demands, the machine manufacturer had to implement new heat transfer methods. This requires faster temperature correction and, above all, more precise control. That's why Levitech was looking for an alternative to thermal management in its Levitor machine. In JUMO, the company from Almere in the Netherlands found a partner with whom to implement the solution.

Quest

The wafer fabrication reactor consists of 2 graphite disks that are heated to the appropriate process temperature. To obtain optimal results, discs must exhibit specific characteristics. Gas is used during this process to make the plate float between both discs without touching them. Special Kanthal® heating elements are used to achieve the required temperature of 1 200 degrees Celsius.

The goal was to use innovative heat transfer techniques to facilitate very fast heating of the plate as well as very fast cooling. Both sides of the plate have a uniform 0,15 millimeter opening to ensure extremely efficient thermal conductivity. The wafer is heated to the temperature of the graphite discs within seconds. They are controlled using a specific heating control system.

Levitor Semiconductor Manufacturing Machine Levitech

Solution Approach

The heating control system is where the thyristor power controller from JUMO comes into play. JUMO TYA 201 controls the required current and voltage of the Kanthal® heating element in each temperature phase and thus ensures precise temperature progression during the process. This system allows the wafers to be produced at an optimal temperature that is the same every time.

Wafer in Levitek Levitor
Wafer in Levitech Levitor
Heated plate in Levitor from Levitech
Wafer in Levitora thermal process from Levitech

Project results

With the characteristics of thyristor controller JUMO TYA 201, the requirement of more precise control and faster temperature correction could be met. As a result, innovative heat transfer methods can now be used in semiconductor manufacturing. This is how Levitech meets market demands and increases throughput speed at the same time.

More precise control
Faster temperature correction
Greater uniformity at high throughput rates

Do you have a similar task?

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.