Logo JUMO

Accurate temperature monitoring in fuel cells

JUMO application example

Case study - for a clean future

Hydrogen is a key element for a climate-neutral future. Temperature sensors JUMO VIBROtemp. are used to monitor the temperature in fuel cells. With more than 20 years of experience, Proton Motor Fuel Cell GmbH, an international company based in Puchheim, near Munich, is a recognized expert in energy solutions based on clean technologies. With just under 100 employees, the company produces clean hydrogen fuel cells and hybrid fuel cell systems for automotive, marine, stationary and rail applications.

Quest

Fuel cells can best be compared to how batteries work. Energy is produced in a chemical reaction between the anode and cathode. The substances that react together in a fuel cell are hydrogen and oxygen. The PEM (Polymer Electrolyte Membrane) technology uses hydrogen gas (H2) as fuel and converts it with oxygen (O2) from air into clean water. Unlike traditional internal combustion engines, coal-fired power plants and nuclear power plants do not produce or emit toxic, radioactive or environmentally harmful by-products. The only waste is water. To achieve this, however, only renewable energy must be used to produce the required hydrogen. The open-circuit voltage of a fuel cell is 1,23 V. To obtain higher voltages, fuel cells are arranged one behind the other, like batteries in a flashlight, and then “stacked” on top of each other.

Fuel Cell Stack Module from Proton Motor Fuel Cell GmbH

Solution Approach

Each fuel cell stack requires three temperature probes. They are installed in the so-called media adapter plates. These plates are mounted on fuel cell stacks PEM for media distribution and monitoring. The individual assemblies are then combined into stack modules. For indirect monitoring of the cooling section, two temperature probes are required. They are responsible for obtaining the temperature of the coolant circuit (forward and reverse flow). Another sensor JUMO plays a safety role. It is located in the air gap output stream of the stack module. At this point, the sensor acquires the temperature of the reaction air and indicates that the flow of coolant has stopped in case of overheating.

The JUMO measurement technology is in demand when it comes to fuel cell technology.
Proton Motor Fuel Cell GmbH

Project results

Temperature probes JUMO VIBROtemp are used in fuel cells from Proton Motor Fuel Cell GmbH. These screw temperature probes RTD allow you to measure temperature in commercial vehicles, construction equipment, agricultural equipment, engines, compressors and railway technology. The vibration-resistant design achieves excellent long-term stability even under harsh operating conditions. In the application example described, temperature probes reliably monitor temperatures down to 150 °C.

150reliably controlled°Cno
For many applications
Excellent long-term stability

Want to get to know us better?

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.