Logo JUMO
Monitoring is easy

Automation in a paper mill

JUMO application example

Success story: well monitoring

Making paper requires a significant amount of water. Since this water is taken from wells and rivers, it affects the water balance in the region. That is why it is necessary to accurately control both the amount of water that is taken and the water level in the wells. Together with the JUMO Engineering team, a paper mill in Germany has developed an automated solution for monitoring groundwater wells.

Quest

The paper mill in Germany is a medium-sized family business that processes exclusively waste paper. It has two sites that process more than a million tons of raw corrugated paper every year. During the paper making process, water is used to dissolve and clean the waste paper. It is also used as a transport medium for cellulose, which is reduced.

The mill has four groundwater wells on the Germany site that serve as a source of water. Three observation wells are used to measure groundwater levels. To ensure that the amount of water that is taken does not harm the water balance in the region, a report of hourly water levels in the wells must be provided to the district president. The hourly, daily and annual flow rates of the pumps in each of the wells must also be recorded and monitored, since the total sum of these flow rates cannot exceed a certain limit value. In addition, in addition to recording, monitoring and evaluating values ​​in wells, bidirectional communication with the superordinate control room also had to be integrated.

Measurement, control and automation system JUMO mTRON T with plant visualization

Solution Approach

All these requirements were fulfilled by the automation system JUMO mTRON T, compact controller JUMO dTRON 308H and level and flow sensors JUMO. Each well was linked to its own interface in the JUMO mTRON T. system. JUMO dTRON 308 controllers were built into the well systems themselves to measure levels and flows, and to determine pump speeds. The captured measurement data is stored and processed in the multi-function panel JUMO mTRON T. Daily, weekly or monthly values ​​can be very easily determined from the flow rate through the provided integrator functions. Limit value monitoring can also be done with minimal effort using predefined functions.

In addition, all measurement data is stored in the mTRON T system in a form protected from unauthorized access. This data can be retrieved automatically using the communication software JUMO PCC and stored in a network archive. Additionally, automated reports can be created individually according to clients' requirements. They can be stored in formats such as PDF, XLS or text files in a predefined folder structure on the network. It is also possible to send documents directly by email.

Project results

During the project, the paper mill not only trusted the JUMO product, but also the experience of the JUMO Engineering. team. They developed the application directly from the PLC programming, including visualization, before generating an automated report.

Acquisition of all measured values in one system
Manipulation-protected storage of all measured data
Automatic reports according to customer requirements

Do you have a similar task?

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.