Logo JUMO

Beer production

See how the measuring technology and automation JUMO are used in the brewing stages. The diagram shows the mash and lauter tuns, the wort kettle, the cooler and the fermentation and storage tanks. Select a node to find out what parameters are monitored in this area and what devices are used for this.

Mash tun

Accurate temperature measurement and control is very important when preparing wort in the mash bath. Here, a mixture of malt and water is exposed to a certain temperature and time so that the starch contained in the malt is broken down into sugar. Precise temperature control ensures high sugar yield during this process.

More

Brewery management system

Our system, based on JUMO variTRON and JUMO variTRON Program Editor, allows autonomous control of mashing, filtration and wort boiling processes. This way, the next batch can be steeped while the wort is boiling. At the same time, all necessary data such as temperature, pressure, pH value, flow rate and stirring speed are monitored and recorded using JUMO smartWARE Evaluation.

More

Filtration tank

During the malt husk mashing process, the spent grain is separated from the wort. Here the spent grain acts as a filter. The wort is pumped and recirculated through the circuit until a filter layer is formed from the husks. The agitator is controlled by differential pressure to ensure effective filtration.

More

Wort kettle

Boiling the wort extracts the aromatic components from the hops. At the same time, all components that could lead to an unpleasant aftertaste in the beer are evaporated. This frees the wort of other substances contained in the lees, which are denatured and separated at high temperatures. A positive side effect of boiling wort is that it sterilizes.

More

Wort cooler

After whirlpool clarification or filtration, the wort must be cooled to fermentation temperature as quickly as possible. Parameters such as time and temperature are also very important here. The flow rate of the wort is regulated by its temperature. The warmer the wort, the slower it flows through the cooler.

More

Container for fermentation and storage

During fermentation, the wort is mixed with a certain number of yeast cells. At the beginning of the fermentation process, the yeast is well aerated and then fermented at the optimal temperature for the yeast. During subsequent storage, the yeast is harvested and the green beer is stored at a specific temperature and for a specific period of time depending on the type of beer.

More

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.