Logo JUMO

Groundwater treatment

Most of our drinking water comes from groundwater. Here you will find measurement technology based on drinking water purification processes from groundwater. The diagram shows the various steps required to purify drinking water. Click on the process for which you need measurement technology. Based on your selection, the product range JUMO for that process will be displayed. With the help of a detailed description you will be able to find various solutions JUMO for machines and systems used for drinking water purification.

Water well

One of the sources of drinking water is groundwater. To ensure reliable monitoring of drinking water, various parameters are measured and monitored. One of the most important parameters is the pH value.

Learn more

Coagulation and flocculation

Flocculation is a process used in drinking water treatment to reduce turbidity. During this process, very small particles are coagulated from the water. In addition to turbidity, the level and flow of contents in the flocculation unit must be measured and controlled.

Learn more

Sedimentation

Solids and turbidity resulting from flocculation can be separated by settling. In this case, the water quality is controlled by electrical conductivity and pH value. If the pH value is optimized for flocculation of organic and inorganic materials, it is adjusted after flocculation separation and before filtration.

Learn more

Filtration

Filtration is a process in which a mixture of solids and liquids in water or wastewater can be separated or separated using filters. Pressure control before and after the filter is essential for effective filtration.

Learn more

Disinfection

Disinfection removes or kills microorganisms from water. Chlorine is the most commonly used disinfectant for treating drinking water. Following the principle of “as much as possible and as little as possible,” it is necessary to constantly monitor the concentration and dose of chlorine.

Learn more

Water tank

Purified drinking water is stored in tanks. The water level in these tanks requires constant monitoring. Ultimately, the reservoirs should be neither empty nor overfilled, but an efficient supply of drinking water should be guaranteed.

Learn more

Privacy Settings

This preview uses local files. Analytics services JUMO are not connected.