Transducers and regulators
Found: 25
Technical filters
-
Popular productJUMO AQUIS touch P
Type 202580- 2 selected analytical inputs
- 10 configurable switching outputs
- Up to 15 additional measuring signals
-
Popular productJUMO AQUIS touch S
Type 202581- Up to 21 add. measuring signals
- selected analytical inputs
- 17 configurable switching outputs
-
Popular productJUMO digiLine pH/ORP/T
Type 202705- Easy sensor/electrode replacement
- Reusable Electronics
- Recording Calibration Data
-
Popular productJUMO CTI-750
Type 202756- Choice of four measuring ranges
- Fast and accurate temperature measurement
- Suitable for processes CIP and SIP
-
JUMO dTRANS pH 02
Type 202551- Intuitive configuration
- Choosing a Data Visualization Method
- Optionally with Profibus-DP or RS422/485
-
JUMO dTRANS CR 02
Type 202552- Choosing a Data Visualization Method
- Optionally with Profibus-DP or RS422/485
- Easy configuration and programming
-
JUMO dTRANS AS 02
Type 202553- Intuitive configuration
- Choosing a Data Visualization Method
- Optionally with Profibus-DP or RS422/485
-
JUMO AQUIS 500 pH
Type 202560- Easy control and setup
- Selecting a measurement visualization method
- Menu available in Polish
-
JUMO AQUIS 500 CR
Type 202565- Menu available in Polish
- Easy control and setup
- Selecting a measurement visualization method
-
JUMO AQUIS 500 Ci
Type 202566- Intuitive operation and setup
- Selecting a measurement visualization method
- Menu available in Polish
-
JUMO AQUIS 500 AS
Type 202568- Implemented calibration procedures
- Easy control and setup
- Menu available in Polish
-
JUMO AQUIS 500 RS
Type 202569- Intuitive operation and setup
- For sensors with Modbus interface RS485
- Menu available in Polish
-
JUMO ecoTRANS pH 03
Type 202723- Screw terminals for connecting sensors
- Display of pH and mV values.
- Intuitive calibration procedure
-
JUMO ecoTRANS Lf 01/02
Type 202731- Calibration timer
- Mounting on DIN-rail
- Teach-In Functions
-
JUMO ecoTRANS Lf 03
Type 202732- Built-in temperature compensation
- Contact USP to USP<645>
- For mounting on DIN rail
-
JUMO digiLine Ci ST10
Type 202760- Preventative maintenance with JUMO DSM
- For inductive conductivity cells
- Interface JUMO digiLine or IO-Link
-
JUMO digiLine Ci HT10
Type 202761- Transducer built into the sensor
- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
-
JUMO digiLine CR ST10
Type 202762- Preventative maintenance with JUMO DSM
- For conductivity cells
- Interface JUMO digiLine or IO-Link
-
JUMO digiLine CR HT10
Type 202763- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
- converter in EC cell
-
JUMO digiLine CR HT20
Type 202764- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
- converter in PVC cell
-
JUMO digiLine CR HT30
Type 202765- Converter with cell VA
- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
-
JUMO digiLine CR HT40
Type 202766- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
- converter in cell SL
-
JUMO digiLine CR HT50
Type 202767- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
- converter in cell PK
-
JUMO digiLine CR HT60
Type 202768- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
- converter in cell GT
-
JUMO digiLine CR HT70
Type 202769- Preventative maintenance with JUMO DSM
- Interface JUMO digiLine or IO-Link
- converter in cell 4P
No results were found for the selected parameters.
In this section
- Transmitters and controllers for ammonia measurement (NH₃) JUMO offers the necessary transmitters and controllers for optimal ammonia measurement and dosing. You can rely on the quality and experience of JUMO to obtain and monitor ammonia concentrations - for laboratory applications, for coolant monitoring or for leak monitoring in air conditioning systems...
- Transducers and controllers for measuring dissolved oxygen (O₂) Measuring dissolved oxygen concentration or saturation is important in many fields. These include fish farming, water purification or general water quality monitoring. JUMO offers reliable transmitters and controllers to efficiently measure and control oxygen concentration or saturation. They...
- Transducers and controllers for turbidity measurement It is often necessary to measure the turbidity of liquids (for example, in the laboratory or during water purification). JUMO offers high quality transmitters and controllers for reliable particle count acquisition and control in a variety of applications.
- Transducers and controllers for measuring bromine (Br) In many areas, bromine is used to disinfect aquatic environments. Even at pH values up to 8 it actively fights bacteria, viruses and fungi. Transmitters and controllers from JUMO allow you to obtain the bromine concentration and optimally control the dosage of the disinfectant. You can also use…
- Transmitters and controllers for free chlorine Chlorine is used for disinfection in many areas (such as swimming pools). Bacteria, viruses and fungi are related. Transmitters are used to measure unbound or free chlorine. In addition, the controllers allow optimal dosing of disinfection. Intelligent, bus-compatible connection system JUMO…
- Transducers and controllers for measuring hydrogen peroxide (H₂O₂) Hydrogen peroxide is also known as perhydrol, oxygenated water or perhydroacetic acid. It is a popular bleaching agent that is also used for disinfection. Transmitters and controllers from JUMO allow you to accurately and reliably measure and control the hydrogen peroxide concentration in your process.
- Converters and controllers for conductive conductivity measurements JUMO offers you a choice of different high-quality transmitters and controllers for measuring conductivity in liquids (e.g. compact and separate design type, IO-Link or JUMO digiLine - intelligent, bus-compatible connection system).
- Converters and controllers for measuring chlorine dioxide (ClO₂) Like chlorine, chlorine dioxide is also used for disinfection in many areas to effectively rid aquatic environments of bacteria, viruses and fungi. Transmitters and controllers from JUMO ensure that you always have disinfection under control and that you can dose optimally. Intelligent, bus compatible...
- Transducers and regulators for measuring total chlorine Chlorine is used for disinfection in swimming pools and many other water treatment applications. In aquatic environments it effectively kills bacteria, viruses and fungi. Transmitters and controllers allow you to accurately measure and optimally dose the total chlorine concentration. Intelligent, bus-compatible connection system for analysis...
- Converters and regulators for pH measurement Accurate measurement and control of pH values are extremely important for regulating chemical processes and protecting our health (eg for drinking water). As a result, you must be able to rely on transmitters and controllers. JUMO has many years of experience in the production of measurement and control technologies that…
- Transducers and controllers for inductive conductivity measurement JUMO offers a variety of transmitters and controllers in the field of inductive conductivity measurement. These include a compact design type and a design type that is separate from the sensor. You can also benefit from digital communication via IO-Link or the intelligent, bus-compatible connection system JUMO...
- Converters and regulators for measuring ozone (O₃) Also, instead of chlorine or bromine, ozone is used to remove germs and bacteria in aqueous solutions. The optimal dose of disinfection requires accurate measurement of ozone concentration. Transmitters and controllers from JUMO perform both tasks. In addition, you can take advantage of the intelligent, bus-compatible system JUMO…
- Transducers and regulators for measuring redox potential The redox value provides information about the oxidation and disinfection power of (chlorinated) water. Thus, redox potential is used to measure the disinfection ratio as well as organic matter and therefore water quality. Transmitters from JUMO provide reliable redox measurements...
- Transducers and controllers for measuring peracetic acid (C₂H₄O₃) Ethanoic peroxyacid or peroxyacetic acid is commonly called peracetic acid (PER). Due to its highly oxidizing properties, it is used as a bleaching agent or for disinfection. Transmitters and controllers from JUMO provide reliable acid concentration measurements and can control...