Temperature
Found: 172
-
JUMO STM-RW-2
Exhaust Gas Temperature MonitorType 601540
- Microswitch
- Automatic reset
- High contact reliability
-
JUMO ETH
ETH seriesType 602010
- High operating temperature range
- No additional power supply
- Universal use
-
Popular productThermostat for panel mounting
EM series to 500 °CType 602021
- Self-monitoring when pressure drops
- No additional power supply
- Several single-field combinations
-
JUMO EM
EM series up to 650 °CType 602025
- No additional power supply
- High switching point accuracy
- Temperature compensation
-
-
JUMO heatTHERM
Panel-mounted thermostatType 602031
- Microswitch with step system
- Safe shutdown at -20 °C
- Temperature compensation
-
Out of productionJUMO heatTHERM P100
Panel-mounted thermostatType 602051
- Compact dimensions
- Cadmium-free version
- No additional power supply
-
JUMO heatTHERM P300
3-phase panel-mounted thermostatType 602090
- Increased security
- Simple and quick installation
- Three-pole thermostat STB
-
Popular productSingle surface mounted thermostats
ATH seriesType 603021
- Self-diagnosis when pressure drops
- Emergency switch at -20 °C
- Rugged housing
-
JUMO ATH
Surface-mounted double thermostatType 603026
- Emergency switch at -20 °C
- Self-monitoring when pressure drops
- 2 separate measuring and switching systems
-
JUMO ATH.-SE
ATH.-SE seriesType 603031
- Immunity to environmental influences
- Microswitch
- No external power supply
-
JUMO ATHS-SW
Surface-mounted single or double thermostatsType 603035
- Immunity to environmental influences
- Separate measuring and switching system
- Microswitch
-
JUMO AMTHF
AMTHF seriesType 603051
- Universal use of thermostats
- Immunity to environmental influences
- No external power supply
-
Popular productJUMO heatTHERM-AT and DR
Surface-mounted thermostatType 603070
- Push-In® connection technology
- High switching point accuracy
- Universal use
-
JUMO frostTHERM-AT/DR
Frost protection thermostatType 604100
- Surface temperature control
- Microswitch with snap-in system
- Easy installation and operation
-
JUMO frostTHERM-ATE
Electronic frost protection thermostatType 604170
- Versatility of use
- Capillary self-control
- Built-in membrane heating
-
JUMO WTHc
WTHc seriesType 604514
- 3 measuring and switching systems
- Optimal fit
- No additional power supply
-
JUMO exTHERM-AT
Explosion-protected surface-mounted thermostatType 605055
- Applicable up to and including zone 0
- Single or double thermostat
- Universal use
-
ATEX thermowell
Accessories for separation of hazardous areas 0/1 and 20/21Type 605057
- Screw-in and weld-on bushings
- Custom lengths on request
- Certificate 3.1 as standard. configuration
-
NewJUMO exTHERM S200
Surface-mounted thermostat for ATEX applicationsType 605058
- Ex i version for installation in zone 1/21
- Connection technology PUSH IN
- Fast and secure connection
-
Process connections and covers for thermostats
For thermostatsType 606710
- Universal use
- Low investment costs
- High load capacity
-
Knobs for setting the setpoint
of the EM seriesType 606715
- High load capacity
- Low investment costs
- Universal use
-
Bimetal mechanical thermometer for industrial needs, class 1.5, similar to EN 13190
For local temperature measurementType 608001
- Insensitive to ambient temperature
- Linear behavior of the indicator
- No additional power supply
-
Bimetallic dial thermometers
Industrial mechanical thermometersType 608002
- Insensitive to ambient temperature
- Accuracy class 1.
- No additional power supply
-
Bimetallic thermometers for the chemical industry
Industrial mechanical thermometersType 608003
- No additional power supply
- Insensitive to ambient temperature
- Accuracy class 1.
-
Bimetal thermometers for transformers
Transformer versionType 608005
- No additional power supply
- Clearly readable display
- Insensitive to ambient temperature
-
Temperature controller
Panel mountingType 608201
- Panel Mounting
- No additional power supply
- Capillary measuring system
-
Dial thermometer
For local monitoringType 608225
- No additional power supply
- Capillary measuring system
- Accuracy class 1.
-
Bimetallic switches and limiters
For local temperature monitoringType 608301
- Easy assembly
- No external power supply
- Direct process connection
-
Pointer gas thermometer
Dial thermometers for temperature measurement and monitoringType 608425
- Capillary measuring system
- No external power supply
- Accuracy class 1.
-
JUMO MICROSTAT-M
Temperature controllerType 608501
- No external power supply
- Capillary measuring system
- Setpoint adjustment from the front
-
Contact dial thermometer
For temperature controlType 608520
- No external power supply
- Capillary measuring system
- The spring protects the capillary from bending
-
Pointer gas thermometers
For temperature controlType 608523
- Various process connections
- No external power supply
- Capillary measuring system
-
JUMO dicoTEMP 800
Dial thermometer with microswitchType 608530
- Independent control
- Small installation depth
- High process reliability
-
Contact dial thermometer
Expansion thermometersType 608540
- UV resistant housing
- No external power supply
- Capillary measuring system
-
Thermowell with threaded connection
For dial thermometerType 608730
- Low investment costs
- Universal use
- High strength and load capacity
-
JUMO dicoTEMP 100
Thermowell with integrated temperature sensorType 608740
- Modernization of existing systems
- Diversification of temperature measurements
- Installation without additional projects
-
Popular productJUMO eTRON T100
Electronic thermostat with optional PID two-state controller functionType 701052
- Compact design
- Switching powerful loads
- Real time display
-
JUMO exTHERM-DR
Two-state controller with [Ex ia] input according to ATEXType 701055
- Interface USB at the front of the controller
- Into a potentially explosive area
- LCD-display
-
Out of productionJUMO eTRON M100
Electronic cooling controllerType 701061
- Sound alarm
- Setup program
- Real time clock
-
Out of productionJUMO eTRON M100
Dual channel electronic cooling controllerType 701066
- Linearization to customer specifications
- Setup program
- Password protected parameter level
-
NewJUMO miroTRON
Electronic thermostat with optional PID two-state controller functionType 701080
- Flexibility of use
- Simple controls - text messages
- Additional PID Control Function
-
NewJUMO miroTRON
Electronic thermostat with optional PID two-state controller functionType 701090
- Flexibility of use
- Simple controls - text messages
- Replacing clock thermometers
-
Popular productJUMO safetyM STB/STW
Safety temperature limiter and safety temperature monitor according to DIN EN 14597Type 701150
- External and internal reset
- Text LCD display
- Configuration via interface USB
-
JUMO safetyM STB/STW Ex
Electronic safety temperature limiters and monitors according to DIN EN 14597 / ATEXType 701155
- Setup program
- Intrinsically safe input [Ex ia]
- Monitoring of ignition sources
-
NewJUMO safetyM TA
Multifunctional safety limiter with fault toleranceType 701158
- Freely configurable
- Maximizes equipment availability
- Certificates SIL 2/3 and PL c/e
-
JUMO safetyM TB/TW
Temperature limiter/monitorType 701160
- Alphanumeric LCD display
- Universal measuring input
- Setup program
-
JUMO safetyM TB/TW 08
Temperature limiter and monitor according to DIN EN 14597Type 701170
- Possibility of selecting 17 linearizations
- External and internal reset
- Simple configuration
-
Popular productJUMO diraVIEW 104/108/116/132
Digital indicatorType 701510
- Fast and easy commissioning
- Creating an application using ST-Code
- Intuitive operation and setup
-
NewJUMO meroVIEW
Multifunction digital indicator with PLC functionType 701551
- Wide range of connectivity options via interfaces
- Intuitive setup and control
- Fast and easy commissioning
-
NewJUMO miroVIEW
Smart digital indicator with limit value monitoring function for panel mountingType 701580
- Flexibility in use
- Easy control via text
- Fast and easy commissioning
-
NewJUMO miroVIEW
Smart digital indicator with limit value monitoring function for panel mountingType 701590
- Flexibility in use
- Simple text control
- Retrofitting with bimetallic thermometers
-
NewJUMO favoTRON
Compact PID controllerType 702011
- Easy operation and setup
- Quick start
- Excellent readability
-
Out of productionJUMO iTRON DR 100
Compact controllerType 702060
- Two Line LCD Display
- Configurable measuring input
- Configuration by buttons or via PC
-
NewJUMO diraTRON DR100
Multifunctional controller for DIN-rail mountingType 702061
- Auto-tuning
- Smooth setpoint function
- Limit monitoring
-
Popular productJUMO diraTRON
Compact controllerType 702110
- Creating an application with ST code
- High quality display
- Advanced functionality
-
Out of productionJUMO TDA-300 / TDA-3000
Handheld thermometerType 702540
- Data logger up to 9999 values
- Calibration certificate DKD
- Reading data via interface USB
-
NewJUMO meroTRON
Modular one-channel/two-channel controller with PLC functionType 703051
- Real-time cycle control
- Wide range of possible connections
- PLC functionality
-
Popular productJUMO DICON touch
Two-Channel/Four-Channel Process and Program ControllerType 703571
- Modular structure
- Built-in recorder
- Accounts are password protected
-
JUMO LOGOSCREEN 601
Multichannel paperless recorderType 706521
- Registration of the party protocol
- High process safety
- Registrar interface flexibility
-
JUMO LOGOSCREEN 700
Highly scalable paperless recorderType 706530
- Up to 18 universal analogue inputs
- Additional interface PROFINET-IO
- 10 individual technological screens
-
JUMO dTRANS T01
Temperature transmitter — head or DIN rail mountingType 707010
- Input and output are galvanically isolated
- Interface HART®
- Configuration via setup program
-
Out of productionJUMO dTRANS T02
Temperature transmitters for DIN rail mountingType 707020
- Universal measuring input
- LCD-display
- 2 open collector output
-
Out of productionJUMO dTRANS T03
Temperature transmitter for head or DIN rail mountingType 707030
- Measuring circuit monitoring NAMUR
- Head and rail mount options
- Configuration via setup program
-
Popular productJUMO dTRANS T05
Programmable two-wire transmitterType 707050
- Configuration via USB-cable
- Linearization to customer specifications
- LED (red/green)
-
JUMO Wtrans B
Head transmitter with wireless data transmissionType 707060
- Configuration using the PC setup program
- Stationary and mobile measurements
- Interference-free data transfer
-
NewJUMO dTRANS T06 Junior
Multifunctional four-wire transmitter in mounting rail caseType 707070
- Linearization to customer specifications
- High measurement accuracy
- Quick start
-
Popular productJUMO dTRANS T06
Multifunctional four-wire transmitter in mounting rail caseType 707071
- High galvanic isolation of signals
- Universal measuring input
- SIL 2/SIL 3 according to DIN EN 61508
-
JUMO dTRANS T06 Ex
Temperature transmitter with SIL certificate for hazardous areaType 707075
- Universal measuring input
- SIL 2 or SIL 3 according to DIN EN 61508
- Ex certificate according to ATEX and IECEx
-
JUMO dTRANS T07
Two-channel temperature transmitter with HART®/ATEX/SILType 707080
- High measurement accuracy
- Safe operation
- Two universal measuring inputs
-
JUMO dTRANS T09
Temperature transmitters screwed onto sensors Pt100/Pt1000 with connector M12Type 707090
- High resistance to shock and vibration
- High reliability and long service life
- Modernization and digitalization of the process
-
Ex-i repeater power supply and input isolating amplifier
Accessories for intrinsically safe transmittersType 707530
- Wide range power supply
- Protocol support HART
- Certificate SIL 2
-
Isolation amplifier Ex-i
Two-channel isolated switching amplifier JUMO for hazardous areasType 707540
- Safe signal transmission
- Line fault detection
- For Ex zone 2, sensor in zone 0
-
Application for devices JUMO
Mobile access to JUMO devicesType 709771
- Data Preview
- Versions for Android and iOS
- Remote access to devices JUMO
-
Thermocouples with form B terminal head
For devices and plants tested according to DIN EN 14597Type 901006
- Single or double thermocouple
- Use according to DIN 4754
- for media: water, oil or air
-
Popular productScrew-in thermocouples
With terminal head form BType 901020
- Single or double thermocouple
- Version with temperature converter
- Various connection head options
-
Screw-in thermocouple with J-head
Thermoelectric sensors JUMOType 901030
- Single or double insert
- Matching DIN EN 60584/DIN 43710
- Isolated or closed version
-
Screw-in thermocouple with compensation cable
Thermoelectric sensors JUMOType 901050
- Single or double thermocouple
- Various compensation cable materials
- Thermocouple type K or L
-
Screw-in melt thermocouples
Thermoelectric sensors JUMOType 901090
- Various types of thermocouples
- Steel cover and measuring tip
- Measuring tip with ceramic insulation
-
Push-in thermocouples
Thermoelectric sensors JUMOType 901110
- Single or double thermocouple
- Mounting point, sealed to 1 bar
- Version with temperature converter
-
Push-in thermocouples
Thermoelectric sensors JUMOType 901120
- Single or double thermocouple
- Installation area, sealed to 1 bar
- Version with temperature converter
-
Push-in thermocouples
With compensating cableType 901150
- Thermocouple type J, K and L
- Angled cable outlet
- Various types of compensation cables
-
Push-in thermocouples
With bayonet fastenerType 901190
- Single or double thermocouple
- Assembly and disassembly without tools
- Adjustable spring pressure
-
Sheathed thermocouple according to DIN 43710 and DIN EN 60584
Thermoelectric sensors JUMOType 901210
- Insertion length to customer specifications
- Sheathed flexible cable
- Vibration-resistant measuring insert
-
Sheathed thermocouple with type B head according to DIN 43710 and DIN EN 60584
Thermoelectric sensors JUMOType 901220
- Vibration-resistant measuring insert
- Installation length on request
- Sheathed flexible cable
-
Jacketed thermocouple with J type head according to DIN 43710 and DIN EN 60584
Thermocouple JUMOType 901230
- Installation length on request
- Sheathed flexible cable
- Vibration-resistant measuring insert
-
Sheathed thermocouple with plug according to DIN 43710 and DIN EN 60584
Thermoelectric sensors JUMOType 901240
- Installation length on request
- Sheathed flexible cable
- Impact-resistant measuring insert
-
Sheathed thermocouple with compensation cable according to DIN 43710 and DIN EN 60584
Thermoelectric sensors JUMOType 901250
- Installation length on request
- Sheathed flexible cable
- Vibration-resistant measuring insert
-
JUMO FOODtemp
Vapour-tight push-in type K thermocoupleType 901350
- Vapor-tight design
- High mechanical strength
- Various measuring points
-
Push-in thermocouples
With terminal head form AType 901830
- Single, double or triple thermocouples
- Available with converter
- Plating in platinum or platinum-rhodium alloy
-
RTD temperature probes
For devices and plants tested according to DIN EN 14597Type 902006
- Single, double and triple options
- Various coating materials
- For devices and installations according to DIN EN 14597
-
Popular productScrew-in RTD temperature probe
With terminal head form BType 902020
- Sensor in single and double versions
- Version with temperature converter
- Replaceable measuring insert
-
JUMO Etemp B
Screw-in RTD temperature probe with terminal head form BType 902023
- Single or double RTD
- Non-replaceable measuring insert
- Temperature converter 4...20 mA
-
Popular productScrew-in RTD temperature probe
With terminal head form JType 902030
- Single or double insert
- 2-, 3- and 4-wire connections
- Version with temperature converter
-
JUMO VIBROtemp
Screw-in RTD temperature probe with plug connectorType 902040
- Reliable plug connection
- Vibration-resistant design
- Long term stability
-
Screw-in RTD with plug according to DIN EN 175301
JUMO RTD temperature probeType 902044
- Reliable plug connection
- Versions with converter available
- Certified according to DNV GL
-
Screw-in resistance temperature sensors with connecting cable
JUMO RTD temperature probesType 902050
- Sensor in single and double versions
- PVC, silicone, PTFE, metal braid
- Two-, three- or four-wire
-
Screw-in melt RTD temperature probe
JUMO RTD temperature probesType 902090
- Measuring tip with ceramic insulation
- Stainless steel protection tube
- Pointed or flat tip
-
Push-in RTD temperature probe with terminal head (form B) for standard applications
JUMO RTD temperature probesType 902120
- Single or double sensor Pt100
- Replaceable measuring insert
- Temperature converter as option
-
JUMO Etemp B
Push-in RTD temperature probe with terminal head (form B) for standard applicationsType 902123
- Single and double versions
- Non-replaceable measuring insert
- Version with built-in transmitter
-
Plug-in resistance temperature sensors with J-head
JUMO RTD temperature probesType 902130
- Single and double versions
- 2-, 3- and 4-wire connections
- Head temperature converter (optional)
-
Plug-in resistance temperature sensor with connecting cable
JUMO RTD temperature probesType 902150
- Single and double versions
- 2-, 3- or 4-wired connection
- PVC cable, silicone, PTFE, metal. braid
-
Plug-in resistive temperature sensor for solar collectors with cable
JUMO RTD temperature probesType 902153
- Cost-optimized design
- Long term stability
- Cable made of PVC, polyurethane, silicone or PTFE
-
Push-in RTD temperature probe with bayonet connection
JUMO RTD temperature probesType 902190
- Single and double versions
- Excellent thermal conductivity
- Tool-free installation
-
NewJUMO railTEMP
Wheelset temperature sensorType 902195
- Certificate DIN EN 50155/61373
- Resistant to vibration and shock
- Flexible touch technology
-
Sheathed resistive temperature sensor with free ends according to DIN EN 60751
JUMO RTD temperature probesType 902210
- Vibration-resistant measuring insert
- Any dive length
- Sheathed flexible cable
-
Sheathed resistive temperature sensor with type B head according to DIN EN 60751
JUMO RTD temperature probesType 902220
- Vibration-resistant measuring element
- Any dive length
- Sheathed flexible cable
-
Sheathed RTD Temperature Sensor with J-Head according to DIN EN 60751
JUMO RTD temperature probesType 902230
- Vibration-resistant measuring element
- Immersion length on request
- Sheathed flexible cable
-
Sheathed resistive temperature sensor with connector LEMO according to DIN EN 6075
JUMO RTD temperature probesType 902240
- Vibration-resistant measuring insert
- Immersion length on request
- Sheathed flexible cable
-
Sheathed resistive temperature sensor with connecting cable according to DIN EN 60751
JUMO RTD temperature probesType 902250
- Sheathed flexible cable
- Impact-resistant measuring insert
- Immersion length on request
-
JUMO FOODtemp
Food insertion RTD temperature probeType 902350
- Multiple measuring points
- Pressure resistance
- Vapor-tight design
-
JUMO HEAT temp
Screw-in RTD temperature probe for heat meters with terminal head for direct mounting (type DL)Type 902427
- Module D certification (MID/MessEV)
- DIN EN 1434, AGFW 202 and FW 211
- Compliant with German standard MessEG/MID
-
JUMO HEATtemp (Type DS/DL)
Screw-in RTD temperature probes for heat meters with connecting cable for direct mounting (type DS/DL)Type 902428
- Pairing and certification MID
- DIN EN 1434, AGF FW 202 and FW 211
- Type Test Certificate
-
JUMO HEAT temp
Push-in RTD temperature probes for heat meters with terminal head for immersion sleeves (type PL)Type 902437
- Certificate for Module D of Directive MID
- DIN EN 1434, AGFW FW 202 and FW 211
- Compliance MID
-
JUMO HEAT temp
Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)Type 902438
- Pairing and certification MID
- Type Test Certificate
- DIN EN 1434, AGFW FW 202 and FW 211
-
Thermowells for heat meter temperature probes
Accessories for resistance sensors JUMOType 902440
- Various coating materials
- Material certificate 3.1
- Conformity marking and MID
-
Ball valve with connection M10x1
Accessories for resistance sensorsType 902442
- Tees as the optimal solution
- Ball valve as a shut-off device
- Coordination of process connection threads
-
Screw-in paired resistance temperature sensors with type B head for heat meters (type DL)
JUMO RTD temperature probesType 902454
- Certification according to MID
- DIN EN 1434, AGFW FW 202 and FW 211
- Compliant with MessEG and MID standards
-
Paired temperature sensors for heat meters (type DS/DL)
JUMO RTD temperature probesType 902455
- Certification according to MID
- DIN EN 1434, AGFW FW 202 and FW 211
- Compliant with MessEG and MID standards
-
JUMO HEAT temp
Plug-in paired resistance temperature sensors with head type B for thermowells (type PL)Type 902464
- Certificate for Module D of Directive MID
- DIN EN 1434, AGFW FW 202 and FW 211
- Compliant with MessEG and MID standards
-
JUMO HEAT temp
Plug-in paired resistance temperature sensors for heat meters with cable (type PS / PL)Type 902465
- DIN EN 1434, AGFW FW 202 and FW 211
- Pairing and calibration according to MID
- Type Test Certificate
-
Resistive temperature sensor for indoor, outdoor and wall mounting
JUMO RTD temperature probesType 902520
- 2-, 3- and 4-wired connection
- Option with built-in converter
- Compatible with SIL and PL
-
Resistive temperature sensor in duct version
JUMO RTD temperature probesType 902524
- Option with built-in converter
- Various types of temperature sensors
- Compatible with SIL and PL
-
Surface resistive temperature sensor
JUMO RTD temperature probesType 902550
- Quick and easy installation
- Various materials
- Low thermal mass
-
JUMO RTD temperature probes
Pt100 precision RTD temperature probeType 902721
- DAkkS calibration
- Four-wire circuit
- Resistance sensor Pt100
-
Portable indicator for measuring and monitoring temperature using sensor Pt100
Temperature sensors JUMOType 902722
- USB-interface
- DAkkS calibration
- Accurate temperature sensor RTD Pt100
-
Resistive temperature sensor with head and certificate EHEDG
JUMO RTD temperature probesType 902810
- Hygienic process connections
- Installation according to CIP
- Optional: two-wire converter
-
Hygienic protection tubes
Accessories for temperature sensorsType 902812
- Hygienic process connections
- Fast response time
- Easy to clean
-
JUMO dTRANS T100
Hygienic RTD temperature probes for sterile applications, with or without transmitterType 902815
- Hygienic process connections
- RoHS Compliant in EU and China
- Configuration via interface USB
-
JUMO PROCESStemp
RTD temperature probes for process technology with Ex approvalType 902820
- Replaceable measuring insert
- Stainless steel/titanium/tantalum/inconel/
- Two-wire converter available
-
Resistive temperature sensor with cable according to DIN EN 60751
JUMO RTD temperature probesType 902821
- Sheathed cables
- Two-, three- or four-wire
- Single, double and triple options
-
JUMO STEAMtemp
Push-in RTD temperature probe (steam-tight)Type 902830
- Two-, three- or four-wire
- Connecting cables PTFE, FEP, silicone
- 1-, 2- or triple thermometer RTD
-
JUMO Marine Temp
Screw-in RTD temperature probe for marine applicationsType 902850
- Certified by Bureau Veritas
- Ambient temperature up to 100 °C
- Sealing at low and higher pressure
-
System for monitoring oil level and temperature in drives of trucks and agricultural machines
Measuring instruments JUMOType 902880
- Position: standing or hanging
- Additional temperature output
- Connecting cable: polyester
-
JUMO CANtrans T
RTD temperature probe with CANopen outputType 902910
- Vibration-resistant design
- Limit monitoring
- Single or double sensor
-
JUMO dTRANS T1000
Temperature sensor with IO-LinkType 902915
- Low maintenance and upkeep costs
- Process automation
- Reduced commissioning time
-
JUMO Wtrans E01
Measuring probe for humidity, temperature, and CO2Type 902928
- LCD display with backlight
- 2 data entry
- No wiring required
-
JUMO Wtrans T
RTD temperature probe with wireless data transmissionType 902930
- No installation cables
- Interference-free data transfer
- Optional with ATEX
-
JUMO Wtrans T01
Universal receiver for JUMO wireless measuring probesType 902931
- No wiring required
- Linearization according to customer requirements
- Up to 4 analogue outputs
-
Out of productionJUMO DELOS T
Electronic temperature switch with display and analog outputType 902940
- Hygienic process connections
- Wide temperature range
- Configuration via rotary knob
-
NewJUMO DELOS T02
Temperature probe with displayType 902941
- Easy setup
- High process reliability
- Wide range of process connections
-
Multipoint temperature sensor
For temperature measurement in grain silosType 903530
- Up to 64 measuring points
- Robust industrial version
- Certificate ATEX
-
JUMO plastoSENS T01
Voltage-resistant plastic temperature probe for transformersType 904001
- Voltage-resistant temperature sensor
- AC electrical insulation current 3,5 kV
- High load capacity
-
JUMO plastoSENS T02
Vibration-resistant polymer RTD temperature probeType 904002
- Suitable for most liquids
- Shockproof
- Vibration and vibration resistance
-
JUMO plastoSENS T03
Steam-tight plastic temperature probeType 904003
- Completely sealed
- Vapor tightness even at the cable outlet
- Redundant measurement - 2 sensor
-
JUMO plastoSENS T04
Polymer surface temperature sensorType 904004
- Reliable measurement of temperature changes
- Assembly without additional tools
- Contact with pipe surface
-
Popular productPlatinum thin film temperature sensors PCW-M-PtNi
with connection wires according to DIN EN IEC 60751Type 906130
- High measurement accuracy
- High long-term stability
- Standard Ratings and Tolerances
-
Platinum-chip temperature sensors PCW-S-PtNi
with connection wires according to DIN EN IEC 60751Type 906135
- High measurement accuracy
- High long-term stability
- Standard Ratings and Tolerances
-
Platinum-chip temperature sensors PCW-H-Pd
with connection wires according to DIN EN IEC 60751Type 906136
- For high operating temperatures
- High measurement accuracy
- High long-term stability
-
Platinum thermometric resistors PCWR-M-AuNi
with connection wires according to DIN EN IEC 60751Type 906138
- For enclosed spaces
- High measurement accuracy
- High long-term stability
-
Thermometric resistors PCWRB-L-AuNi
with connecting wires and metallized back cover according to DIN EN IEC 60751Type 906139
- Soldered metal. back cover
- For enclosed spaces
- High measurement accuracy
-
Platinum-chip temperature sensors PCWC-A-SnCu
with solderable terminal clamps and epoxy protective coating according to DIN EN IEC 60751Type 906140
- Protection against moisture and condensation
- Solder connection terminals
- High measurement accuracy
-
Popular productPlatinum thin film temperature sensors SMD-L-AuNi
in SMD design type according to DIN EN IEC 60751Type 906141
- For automatic assembly
- Dimensions SMD 0805 and 1206
- AEC-Q200 for selected sensors
-
Popular productPlatinum thin film temperature sensors SMDFC-L-AuNi
in SMD design type according to DIN EN IEC 60751Type 906142
- AEC-Q200 for selected sensors
- For automatic assembly
- Dimensions SMD 0805 and 1206
-
Measuring inserts PCB-B-Au
with platinum chip temperature sensors of SMD design type according to DIN EN 60 751Type 906143
- Pre-assembly
- For mounting simple temperature sensors.
- Low cost for large volumes
-
Thermometric resistors SMDFCB-L-AuNi
SMD (flip-chip) version with metallized back according to DIN EN 60751Type 906146
- Soldered metal. back cover
- For confined spaces
- Size SMD 0805
-
Thermowell with threaded connection for thermocouples and resistance sensors
Accessories for temperature sensors JUMOType 909710
- Operating pressure up to 450 bar
- Non-invasive replacement of temperature sensors.
- Low installation costs
-
Weld-in thermowells for thermocouples and RTD temperature probes
Accessories for temperature sensors JUMOType 909712
- Operating pressure up to 450 bar
- Non-invasive replacement of temperature sensors.
- Low installation costs
-
Connection heads for thermocouples and resistance sensors
Accessories for temperature sensors JUMOType 909715
- Various materials
- Sealed versions
- Temperature Transmitter Installation
-
Terminal blocks for thermocouples and resistance sensors
Accessories for temperature sensorsType 909717
- 2, 4 or 6 connections
- Screw and solder connections
- Screws and gasket
-
Wires and cables: extension, compensation and thermoelectric for thermocouples
Thermocouple accessories JUMOType 909735
- Steel or stainless steel braid
- Covering: silicone, PVC or fiberglass
- Single or double thermocouples
-
Connecting cables for resistance thermometers
Accessories for resistance thermometersType 909737
- Covering: PTFE/silicone/PVC/fiberglass
- For single and double sensors
- For single and double converters
-
Measuring inserts for screw-in resistive sensors with head type B
Accessories for resistance thermometers JUMOType 909740
- Single or double measuring insert
- Two, three or four wire system
- Version with temperature converter
-
Replacement measuring inserts for screw-in thermocouples with head type B
Thermocouple accessories JUMOType 909742
- Single or double measuring insert
- Easy replacement
- Version with temperature converter
-
Thermoelectric measuring inserts according to DIN 43732
Thermocouple accessories JUMOType 909744
- Thermocouple inserts types L, K, S and B
- Standard thermoelectric voltage
- Easy replacement
-
Pipe connections for resistance thermometers and thermocouples according to DIN 43763
Accessories for temperature sensors JUMOType 909750
- Various materials and threads
- Adjustable dive length
- Easy installation and removal of sensors
-
Flanges for thermocouples and resistance sensors
Accessories for temperature sensorsType 909752
- Easy installation and replacement
- Adjustable dive length
- Pressure resistance up to 1 bar
-
Bayonet connectors for thermocouples and RTD temperature probes
Accessories for temperature sensorsType 909754
- Quick installation and replacement of connections
- Immersion length adjustment
- Various threads and diameters
-
Bayonet sockets for RTD temperature probes and thermocouples
Accessories for temperature sensors JUMOType 909755
- Easy installation and replacement
- Various immersion lengths
- Various threads and diameters
-
Thermocouple connectors in mini and standard versions
For thermocouplesType 909760
- Easy replacement
- Low costs
- Quick connection
-
Connectors for resistance thermometers
For RTD temperature probesType 909762
- Quick connection
- Low costs
- Easy replacement
-
NewJUMO dsensTEMP
Digital temperature probe in push-in versionType 913100
- Signal 1-Wire
- Accurate temperature measurement (0,2 °C)
- Enhanced protection against interference
No results were found for the selected parameters.