Safe commissioning and maintenance of pH measuring circuits
Basic rules for working with pH measuring circuits.
Webinar recordings and training videos on the topic
Practical information on measuring pH, redox potential, conductivity, free chlorine, oxygen and turbidity. The videos also show operation of the JUMO transducers and digital sensors.
Basic rules for working with pH measuring circuits.
Additional questions for the webinar on safe commissioning and maintenance of pH measuring circuits.
Practical example of commissioning the sensor electronics using DSM.
How to safely measure redox potential.
Conductometric measuring principle, relative and nominal cell constants, linear temperature compensation and temperature coefficient. The setup of the measuring circuit with AQUIS touch P is shown.
Setting up the measuring circuit with AQUIS 500 CR and tecLine cell CR-GT. Practical recommendations and temperature compensation: linear and for natural water.
Additional questions for the webinar on the basics of conductometric conductivity measurement.
Recommendations for measuring the electrical conductivity of ultrapure water.
Introduction to the four-electrode conductivity sensor and demonstration of its application.
Simple and practical application of the inductive conductivity measurement method.
Introduction to the converter and demonstration of working with it.
Demonstration of the use of the chlorine sensor JUMO.
Overview of the oxygen sensor, its measuring principle and available fittings. Practical commissioning demonstration.
Turbidity measurement basics, setup and maintenance of measurement circuits.
Possibilities of the control function AQUIS touch and its configuration.
Connecting digital sensors to AQUIS touch.
Use of a sensor to detect ammonia entering the secondary cooling circuit.