Electricity production from natural energy sources
JUMO application example
Hydropower success story
Dams have been built over thousands of years, provide flood protection and, together with hydroelectric power plants, make an important contribution to the generation of renewable energy. After all, hydropower produces only negligible CO2 emissions, unlike fossil energy sources. The People's Republic of China also relies on hydroelectric power to meet the country's growing energy consumption in a climate-friendly manner. One of them is the Wudunde hydroelectric power station (WDD) on the lower reaches of the Jinsha River, which came into operation in June 2020.Quest
With an installed total capacity of 10,2 million kilowatts, Wudunde is ranked as the fourth largest hydroelectric power station in China and the seventh largest in the world. It consists of several units and has the largest single-component power in the world. The plant is said to be capable of supplying power to approximately 1,8 million Chinese households from a single unit. Obviously, such a gigantic design imposes special technological requirements, which JUMO implemented together with an internationally recognized converter manufacturer.
For example, the temperature of oil hydraulics in generators and turbines must be monitored and controlled to prevent machine damage, turbine failures, and power generation malfunctions. The temperature sensors used must be suitable for pipes with oversized diameters, respond quickly to high-speed flows and measure in a stable and reliable manner even with large fluctuations. Equally important are excellent sealing properties and low maintenance requirements.
In addition, air humidity and air temperature in generator rooms must be monitored and adjusted if necessary to prevent corrosion, electrical flashes, and damage to electrical installations.
Solution Approach
The Chinese subsidiary JUMO was responsible for the technical implementation of these requirements. Several smart solutions were used that easily mastered even the most extreme conditions.
The unreliable hygrothermal converter and hygrothermal converters in the duct version determine the relative humidity and temperature at the turbine installation points. Humidity is acquired by the capacitive humidity element and converted into current (4-20 mA) or voltage signals (0 to 10 VDC). To determine the temperature, a platinum temperature sensor according to DIN EN 60751 is used, the signal of which is also converted. The temperature of the turbine cooling water is recorded using screw-in resistance thermometers, which have a reliable leak-tight seal even when under pressure or overpressure.
Push-in temperature sensors RTD with SIL approval and metrological registration are used to monitor the air intake and exhaust air temperatures in generators and generator rooms. They are available in several versions and with replaceable measuring inserts.
In this way, any malfunctions that occur can be detected at an early stage so that adequate countermeasures can be taken. These include shutting down parts of the installation or alerting technical personnel.
Project results
Climate change has made the transition to renewable energy more important than ever. The example of Vudunde shows that JUMO makes an important contribution to the energy transition and that it can implement large global projects through its subsidiaries as a result of its flexible and integrated metering and automation solutions. Even particularly complex problems can be transformed into perfectly suited applications by experienced engineers and JUMO engineers. South America, or India.
The hydroelectric dam itself is an important part of China's "West-East Power Transmission Project," which opens up the energy resources of China's west to the underserved east. This is expected to save about 12,2 million tons of coal per year and sharply reduce carbon dioxide and sulfur dioxide emissions.
Do you have a similar task?
Manufacturer JUMO expertise
JUMO offers measuring instruments and automation systems for industrial applications. Contact IMAGO for equipment selection and supply for a project in Kazakhstan.
All applications