Measuring technology for electrolysis - everything that matters at a glance
Renewable energy
Electrolysis plays a central role in the production of green hydrogen and therefore also in the decarbonization of the industrial sector and energy supply. electrolysis monitor The hydrogen compass of the German Society for Chemical Engineering and Biotechnology (DECHEMA) shows how dynamic the expansion is. Among other things, it forecasts that Germany will reach 10GW electrolysis capacity by 2030, as set out in its hydrogen strategy. High-precision sensors are essential to support this development. Find out more in section FAQ below!How does water electrolysis work?
During electrolysis, water (H2O) is split into its components hydrogen (H2) and oxygen (O2) using an electrical voltage. To do this, the electrodes are immersed in ultrapure water and direct voltage is applied. Water molecules are split into their elements at the electrodes. Various types of electrolyzers are used for the process itself.
Alkaline electrolysers (AEL)
This technology is one of the oldest methods of hydrogen production and has been used successfully for almost a century. Thanks to continuous advances such as increasing operating pressures and optimizing electrode materials, alkaline electrolysers remain a proven and economically attractive solution even today. Their robust design, long service life and comparatively low investment costs make them particularly attractive for scalable installations in continuous operation.
In addition to classical atmospheric pressure AEL, there is also alkaline pressure electrolysis, in which the electrolysis process is carried out at pressures typically ranging from 10 to 30 bar (in some cases up to 60 bar).
Electrolyzers PEM
In PEM electrolysis, the proton exchange membrane ensures that protons can pass through in a targeted manner while electrons are held securely. This results in a compact design with a high degree of efficiency and very fast response times. The PEM electrolysers are therefore particularly suitable for applications with highly fluctuating energy sources, for example in combination with renewable energy sources, as well as for mobile applications in which flexibility and rapid adaptation are critical.
High temperature electrolysers (HTE)
HTE electrolysers operate at extremely high temperatures above 500 °C and use solid oxide electrolysis cells (SOECs) as the main component. Thermal support allows them to achieve a particularly high degree of efficiency since part of the energy is introduced as heat. HTE technologies are ideal for connecting to industrial processes where large amounts of waste heat are available, or for applications requiring maximum energy efficiency. Their potential lies primarily in their integration into energy-intensive industries such as chemicals, steel and oil refineries, where they can help reduce CO2 emissions.
Electrolyzers AEM
This technology is similar to the principle of a proton exchange membrane, but transfers anions through the membrane instead of protons. A key advantage over FEM systems is that an expensive platinum catalyst is not required at the anode. In addition, AEM electrolysers are often less sensitive to impurities and can handle a wider range of electrolytes. These features make them a promising option for cost-effective and flexible hydrogen production, especially in applications where material costs and operational safety are key.
Application of hydrogen with JUMO
Why is MSR technology important for electrolysis?
Regardless of the electrolysis technology chosen, processes can only be operated safely, efficiently and economically with the help of accurate measurement technology. It monitors key parameters and ensures that extraction of H2 occurs under optimal conditions. However, reliable measurement is critical not only for process stability and the quality of the hydrogen produced, but also for meeting safety standards and extending the life of the electrolysers.
Which measurement parameters are important for electrolysis?
Electrolysis is a reaction process in which numerous physical and chemical factors must be kept in balance.
- Pressure: Stable pressure conditions are critical to hydrogen production and mechanical stress in the plant, preventing leaks and ensuring a constant supply of gas.
- Temperature: Has a great influence on the speed and efficiency of the reaction. Precise temperature control is essential, especially for high temperature electrolysers.
- Water quality: Even the smallest particles or organic substances can damage membranes and electrodes. Conductivity as well as the pH value provide information about the state of the electrolyte and allow contamination to be detected at an early stage. Consistent, ultra-pure water quality protects cells, extends membrane life and reduces maintenance requirements.
- Gas purity: Even minimal impurities in hydrogen can impair downstream processing in fuel cells or industrial applications and significantly reduce the efficiency of downstream processes.
- Total consumption of water and gas: Ensure a constant supply of electrolysis cells and stable operating conditions.
- Electrical meters (current, voltage): The basics of process control and efficiency calculations are critical to assessing plant performance.
Which sensors and measuring instruments are suitable for individual meters?
To ensure process reliability and efficiency in modern electrolysis plants, a wide range of specialized sensors and measuring instruments are used. Depending on the measuring instruments, different technologies are required that can optimally withstand the relevant chemical, thermal and hydraulic conditions.
pressure
Persistent Pressure sensors These sensors operate accurately even at high operating pressures and in contact with aggressive media. They are often equipped with corrosion-resistant materials and digital interfaces for integration into process control systems.
Temperature
Temperature measurement is usually carried out using RTD temperature probes with Sensors Pt100 or Pt1000 and thermocouplesHigh temperature electrolysers require special ceramic sensors to reliably cope with extreme conditions.
Recording of the webinar
Efficient hydrogen processes in the spotlight
Learn more about specific temperature measurement challenges in our webinar recording.
Be careful!Flow
Electromagnetic flow meters (MID) are primarily used for purchasing water and electrolyte solutions. They operate according to the Faraday principle, completely wear-free, and are particularly suitable for conductive liquids. They provide high measurement stability, are impervious to changes in fluid properties and can be easily integrated into pipes. As a result, they are the preferred solution for continuous monitoring of large volume liquid flows in electrolysis processes. Coriolis flowmeters are primarily used for hydrogen and oxygen. They measure mass flow directly and also provide density and temperature data.
Water quality
Water quality is controlled using conductivity sensors and pH measuring devices, often in the form of combination electrodes or digital measuring systems with integrated temperature compensation. These devices are specially designed for highly purified water and electrolyte solutions.
What standards apply to electrolysis measurement technology?
Electrolysis measuring technology must comply with various standards, ensuring both functional safety and explosion protection and a mechanical version of the measuring points.
SIL (DIN EN 61508 - Security Integrity Level)
This standard specifies requirements for the functional safety of electrical, electronic and programmable systems. Safety-related measuring points such as pressure, temperature or flow sensors require a certain safety integrity level (SIL). This describes the probability with which the system responds safely in the event of a fault. The higher the SIL level (from SIL 1 to SIL 4), the lower the probability of failure. The requirements of SIL are especially important in electrolysis plants, as failures can lead to hazardous conditions such as overpressure or gas leaks.
ATEX/IECEx - explosion protection
Because electrolysis can produce explosive mixtures of hydrogen and oxygen, operators must demonstrate that they have carried out a risk assessment and implemented an explosion protection concept. Directive ATEX (in Europe) and the IECEx system (internationally) define the requirements for devices and protective measures in potentially explosive atmospheres. Measuring devices must be suitably certified to prevent sparking or overheating. This applies in particular to sensors, cable fittings and housings that are installed in zone 1 or zone 2.
DIN 43772 - protective fittings for temperature probes
This standard regulates the option of protective tubes (thermal bottles) for temperature probes and specifies materials, designs and dimensions for safe and durable installation. Reliable protection tubes in accordance with DIN 43772 are recommended for protecting sensitive sensors from aggressive media and high pressures of the electrolysis process.
What are the calibration and maintenance requirements for sensors?
Calibration and maintenance of sensors in electrolysis plants is critical to process reliability and compliance with quality standards. hydrogen sensors During use, they must be checked and adjusted regularly to ensure that their measured values are within the specified tolerances. Calibration is typically performed at intervals of 6 to 12 months depending on operating conditions and manufacturer specifications.
Calibration must be documented according to recognized standards such as ISO 9001 or ISO 17025 to ensure traceability and compliance. In addition to calibration, maintenance must also take into account mechanical and chemical aspects: measuring points must be cleaned to prevent deposits or corrosion. The protection tube as well as the seals must be tested regularly and replaced if necessary.
Application of hydrogen with JUMO
How is cybersecurity ensured in the electrolysis process?
Since networking of measurement devices also poses cyber risks, security measures in accordance with standards such as IEC 62443 are necessary for industrial networks. In addition, edge computing solutions are often used to pre-process data on site before transferring it to a central control system or the cloud. The result is faster response times and reduced network load.
What role does MSR technology play in predictive maintenance and condition monitoring?
Continuous process data not only allows you to monitor current operating conditions, but also allows you to identify trends and patterns that indicate impending failure.
Modern sensors provide high-resolution data in real time, which is analyzed in digital control systems or cloud platforms. AI-supported algorithms and assessments can be used to identify deviations from standard operation at an early stage - for example, a slow rise in temperature at the electrodes, indicating material fatigue, or a change in flow, suggesting deposits or blockages. Such indicators enable maintenance actions to be planned before failure occurs.
The result is fewer unscheduled shutdowns, longer life of critical components, and optimized maintenance intervals, significantly reducing operating costs. In addition, condition monitoring maintains compliance with safety standards by immediately detecting and reporting critical conditions such as overpressure or leaks.
Where is the future of electrolysis applications headed?
The increasing degree of digitalization in the hydrogen economy is also changing the field of measurement technology. New demands on data quality, plant networks and automation are driving the development of high-performance sensor systems.
On this basis, special attention is paid to the use of digital twins, which practically reproduce a real electrolysis plant, continuously receive data in real time from the plant and allow simulation, condition analysis, optimization of operational strategies and safety scenarios. In his technical article "Digital twins in hydrogen production“The Hannover Messe platform explains how digital twins make a decisive contribution to efficient process control, evaluation of plant data and increased operational safety.”
At the same time, IoT solutions for sensors They are becoming increasingly important because they enable real-time wireless monitoring of parameters such as current, voltage, pressure and temperature at the cell level. Interface technology is becoming increasingly necessary in this context to enable efficient and secure integration of sensors, edge computing and cloud systems.
How to choose the right measurement technology for an electrolyser?
Selecting the right measurement technology depends on several factors related to process requirements, as well as safety and quality standards. For each meter, a sensor must be selected that is suitable for the operating conditions of the electrolyser. These include: high pressure, corrosive environments or extreme temperatures (e.g. > 500 ° C for high temperature electrolysis).
Another important point is the durability of the material. Sensors should be corrosion resistant and, where possible, fully welded to minimize the risk of leaks. Protective fittings must be suitable for direct contact with hydrogen. The initial reference point is provided by the standard CSA ANSI HGV 3.1 or the previously mentioned standard DIN 43772. In addition, it must be ensured that the devices used are SIL/PL and Ex approved for safety and explosion protection.
Given the complex and partially safety-critical requirements, it is recommended to use the expertise of a sensor specialist to ensure a compliant, reliable and cost-effective long-term solution.